Eucalyptus Shower Fizzies: A Simple DIY Recipe
A shower fizzy is a tidy way to put a couple of drops of eucalyptus oil on a warm shower floor, with a little fizz for fun. A few drops on a warm shower floor is a classic way to enjoy eucalyptus, and a tablet simply packages that amount. The recipe below is a formulation worked out from published chemistry and arithmetic, so make a small batch, and treat the texture as something to adjust.
Eucalyptus Essential Oil
Our own Eucalyptus Essential Oil, in sizes from 0.5 oz to bulk.
From $9.99
Shop Now →Why we like the idea
There is something very satisfying about a handmade tablet sitting in a tin on the bathroom shelf. It looks tidy, it feels like a small treat, and it takes the guesswork out of how many drops to put on the shower floor. If you enjoy projects with your hands, this one gives you a result in a single afternoon, and it makes a thoughtful little gift for anyone who loves a fragrant shower.
What the fizz is
The fizz is an acid meeting a bicarbonate. PubChem's record for sodium bicarbonate, quoting the CAMEO Chemicals database, says it reacts with acids to give off carbon dioxide gas. PubChem lists molecular weights of 84.007 for sodium bicarbonate and 192.12 for citric acid.
From those two numbers comes a ratio. Citric acid has three acidic groups per molecule (general chemistry, not a figure from those records), so a complete reaction uses three bicarbonate units per acid: 3 x 84.007 is 252.0, against 192.1. That is about 1.3 g of bicarbonate per gram of citric acid. Many popular recipes use 2 to 1, which leaves plenty of unreacted bicarbonate, so the batch here uses 1.3 to 1 instead.
The formulation, by weight
| Ingredient | Amount | Share |
|---|---|---|
| Sodium bicarbonate (baking soda) | 52 g | about 53% |
| Citric acid, fine powder | 40 g | about 41% |
| Fractionated coconut oil or another liquid carrier | 6 g | about 6% |
| Eucalyptus oil, any one of our five | 0.8 mL | about 0.7% by weight |
The oil figure is arithmetic: 0.8 mL is about 16 drops at 20 drops per mL, and at an assumed density near 0.9 g/mL it weighs about 0.7 g, roughly 0.7% of the 99 g batch. We publish a density only for one lemon eucalyptus batch (0.863), so the assumption is a planning figure, not a measurement of our other oils. Press the batch into eight molds and each tablet carries about 0.1 mL, which is two drops. That sits under our 0.5% to 2% skin guidance and under the Tisserand Institute's 2% to 4% range for bath and wash-off products, though a tablet on a shower floor is not skin contact and neither number was written for it.
Why oil-bound, and what to watch
Most online recipes bind the powder with a water spritz, which brings preservation questions for something that is stored. This version uses the carrier oil as the binder instead: whisk the eucalyptus oil into the carrier, then rub that through the powders. Oil-bound tablets can be more crumbly and can fizz more slowly because the grains are coated, so adjust to taste, and if you need a spritz of water, press the tablets, dry them fully, make small batches and discard any that turn damp, soft or smell off.
- Work in a dry room with gloves, eye protection and a dust mask, since fine powders are best kept out of eyes and lungs.
- Whisk the bicarbonate and citric acid together dry.
- Stir the eucalyptus oil into the carrier, then rub it through the powder until it clumps when squeezed.
- Pack firmly into eight molds, rest them somewhere dry, then unmold and store airtight. Moisture sets the reaction off, so a damp cupboard is where batches are lost.
- Use one tablet on the shower floor, away from the direct stream, and rinse the floor afterward.
Choosing which oil goes in
The oil you pick decides the whole mood of the tablet, so it is worth a minute of thought. Globulus gives the crisp, cool, spa-like version. Radiata and smithii make a softer, rounder tablet that is easier on people who find strong camphor a bit much. Dives leans minty and sweet, and lemon eucalyptus gives a bright citrus-herbal fizzy that smells quite unlike the others. If you cannot decide, make a tiny half batch of two different oils and keep them in separate, labelled tins. Your nose will tell you which one you reach for first.
Little finishing touches
Presentation is half the fun. Choose molds with simple shapes that release easily, such as a silicone muffin tray or a small ice mold, and let the tablets rest until they feel firm to the touch before you handle them. Wrap them in a bit of baking paper inside a tin, add a label with the oil, the date and the words "shower floor only, not for the bath or the body," and you have a tidy gift. Keep the lid snug, and keep the tin somewhere dry and well away from small children.
Who should skip it, and where to put it
The carrier leaves a slick on a wet tub, so rinse well and keep tablets out of the path of children and older adults. Our Standards page says high-cineole oils are not appropriate for babies and young children and that eucalyptus should stay away from the face of an infant or young child, so a fizzy does not belong in a child's bath or a shower with a baby. Tablets can also look like sweets. Poison Control notes that swallowed eucalyptus oil can cause seizures and advises locking oils away from children and pets, so store them out of reach. If you have a health condition or are pregnant, check with your physician first. Our bath post explains why dropping oil straight into water goes wrong, and our shower piece covers other ways to bring eucalyptus into the shower. For shower surfaces, see surfaces to avoid.
We sell the oil only, so baking soda, citric acid, a carrier and molds come from a grocery, craft or soap-supply shop. Our globulus is the classic spa scent, and the softer radiata, smithii and dives each give a gentler tablet.
A small batch and a labelled tin is all it takes to turn a shower into something a little more special.
Eucalyptus Essential Oil
Eucalyptus Essential Oil from our own shop, in sizes from 0.5 oz to bulk.
From $9.99
Shop Now →